Yale A245 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 76

background image

If the truck is equipped with optional display, check start
sequence and fault light. Turn key to

ON

position. When

the start sequence is complete, battery discharge indicator
lights should show green. If a fault occurs, the fault indica-
tor light flashes red and the LCD displays AL along with the
fault symbol (wrench).

2.

Check the operation of the

brake sensor

. Release the

control handle or delivery handle to allow it to return to the
vertical position. Move the speed/direction control without
lowering the control handle or delivery handle. The traction
system must not operate.

3.

Check the operation of the

speed/direction control

.

Lower the control handle to release the brake. Slowly rotate
the speed/direction control. The lift truck must accelerate
smoothly. Rotate the control in the opposite direction. The
lift truck must stop smoothly and then change direction.
The control must return to the

OFF

position when release.

4.

Check the operation of the

lift

and

lower

functions. Push

the lift button and then the lower button. Check that the
forks raise and lower.

5.

Check the operation of the

traction reverse

function.

Slowly rotate the speed/direction control for slow travel in
the control handle or delivery handle direction. Push the

traction reverse button without changing the position of the
speed/direction control. The lift truck must stop and then
accelerate in the opposite direction. Once the lift truck
changes direction and moves with the control handle or
delivery handle trailing, release the traction reverse button
without releasing the speed/direction control. The lift truck
should

not

accelerate in the control handle or delivery han-

dle direction. (One the traction reverse button has been
pressed, the traction motor should not accelerate the lift
truck toward the control handle or delivery handle.) Full
direction control may be re-established by rotating the
speed/direction control to the

OFF

position or moving the

control handle or delivery handle to a brake

ON

position.

6.

Check the

steering

function. Move the control handle or

delivery handle to the right and left. Check for smooth
movement of the steer (drive) wheel in the same direction.
Steering will be more difficult if the lift truck is stopped.

7.

Check the operation of the

creep speed button

. Move

the control handle or delivery handle to the vertical position.
Press and hold the Creep Speed button while rotating the
direction/speed control. The truck should operate at only
1.6 km/h (1 mph). Lowering the control handle or delivery
handle will maintain the creep speed until the button is

Maintenance

56

«
...
56
57
58
59
60
...
»

Содержание A245













































































Отзывы:

Нет отзывов

Похожие инструкции для A245

Бренд: FLEMING Страницы: 4

Бренд: Still Страницы: 130

Бренд: SEER Страницы: 83

Бренд: HANGCHA Страницы: 108

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды