Yale HOISTS SHAW-BOX YKA Скачать руководство пользователя

Страница: 9 / 166

General information

07.2020

-o

-us

-3

-ys

1 Re

v A

1.4

Crane logbook

A completed crane logbook must be kept for each hoist. The results of the periodic
inspections must be entered in the logbook.

1.5

Transport and storage

Transport

Fig. 1

The product is delivered on a special pallet. This enables it to be loaded and unloaded

safely with a fork-lift truck.

WARNING

Falling parts hazard.

If the product is to be transported suspended,

attach the product to the sling points provided. The sling points are designed for a
max. diagonal pull

≤

45°.

Do not allow the hoist to drop. Set the product down on the ground correctly.

Avoid damage to the product and its components by loading and unloading it
correctly.

Storage

Store the product and its accessories in a dry place.

Store it in a stable position, secure it against toppling or overturning.

Observe environmental protection laws for storage (do not allow oil etc. to leak).

Make sure that the ground is firm and does not permit the machine to sink in.

Ensure the load is evenly distributed, support the hoist at several points.

Do not kink the ropes and avoid contact with the ground.

1.6

Weight

See factory certificate.

1.7

Installation, commissioning, maintenance and repairs

Make sure that installation, commissioning, maintenance and repairs are carried out
by qualified persons only.

We recommend having installation carried out by qualified personnel engaged by the
manufacturer.

Do not carry out any alterations or modifications.

Make sure that additional fitments are approved by the manufacturer.

(During welding work, electrode and ground must be in contact with the same
component!)

Use only original spare parts for repairs.

Make sure that dismantled guards are screwed down again and locked.

If the wire rope hoist is constantly operated out of doors and exposed to the elements

without protection, we recommend fitting a canopy or at

least “parking” the hoist under a

roof.

•

For detailed information about installation see chapter

“Installation”

•

For detailed information about commissioning see chapter

“Commissioning”.

•

For detailed information and about maintenance and repairs see chapter

“Inspection

and maintenance”

Содержание SHAW-BOX YKA







































































































































































Результаты поиска

Содержание SHAW-BOX YKA

Отзывы:

Похожие инструкции для SHAW-BOX YKA

Бренды по названию

Популярные бренды

Yale HOISTS SHAW-BOX YKA, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SHAW-BOX YKA

Отзывы:

Похожие инструкции для SHAW-BOX YKA

Бренды по названию

Популярные бренды