Remove the
tabs with
scissors or
pliers.
Loosen the
tabs in the
SnapArounds by
bending them
repeatedly.
do you have - square - round - or FaCTory Crossbars?
square
ATTACH 2 SNAPAROUNDS
ONTO EACH BAR…
PLACE PADS ONTO BASES.
Attach SnapArounds or MightyMounts in the same direction on each bar.
round
bars
(sTarT
here)
ATTACH PADS TO
BASES WITH PLUGS.
Plugs can be used only
once. If you reconfigure
the bases, see your Yakima
Dealer for replacement
plugs #8890058.
MightyMounts must use kit #8860007
available from your YAKIMA dealer.
Attach two SnapArounds in
opposite directions on each bar.
Remove one
base top and
bottom.
• Reinstall bases with
square holes and round
holes aligned.
•
TIGHTEN completely.
• Continue to step 3.
FaCTory
Crossbars
…contInue to steP 2
(for square bars).
Choose Carrier
posiTion on vehiCle.
Large round holes in bases must
face the rear of the vehicle.
If your MightyMounts require bar caps, install them now.
FaCTory
Crossbars
and
square
