Yaesu FTM-400XDR/DE Скачать руководство пользователя страница 9

Страница: 9 / 220

Before Using

Safety Precautions (make sure to read these)

Make sure to read this manual in order to use this radio safely and correctly.

Note beforehand that the company shall not be liable for any damages suffered by the

customer or third parties in using this product, or for any failures and faults that occur

during the use or misuse of this product, unless otherwise provided for under the law.

Type and meaning of the marks

DANGER

This symbol indicates the possibility of death or serious injury

being inflicted on the user and the surrounding people when

these instructions are ignored and the product is handled

wrongly.

WARNING

This symbol indicates the possibility of death or serious injury

being inflicted on the user and the surrounding people when

these instructions are ignored and the product is handled

wrongly.

CAUTION

This symbol indicates the possibility of physical impediments

occurring or impediments being inflicted on the user and the

surrounding people when these instructions are ignored and

the product is handled wrongly.

Type and meaning of symbols

Prohibited actions that must not be carried out in order to use this radio

safely.

For example, signifies that disassembly is prohibited.
Precautions that must be adhered to in order to use this radio safely. For

example, signifies that the power supply is to be disconnected.

DANGER

Do not use the device in “regions or

aircrafts and vehicles where its use

is prohibited” such as in hospitals

and aeroplanes.

This may exert an impact on electronic

and medical devices.

Do not use this product while driving

or riding a motorbike. This may

result in accidents.

Make sure to stop the car in a safe

location first before use if the device is

going to be used by the driver.

Never touch the antenna during

transmission.

This may result in injury, electric shock

and equipment failure.

When an alarm goes off with the

external antenna connected, cut

off the power supply to this radio

immediately and disconnect the

external antenna from this radio.

If not, this may result in fire, electric

shock and equipment failure.

Before Using

Содержание FTM-400XDR/DE





























































































































































































































Результаты поиска

Содержание FTM-400XDR/DE

Отзывы:

Похожие инструкции для FTM-400XDR/DE

Бренды по названию

Популярные бренды

Yaesu FTM-400XDR/DE, Руководство по эксплуатации

Результаты поиска

Содержание FTM-400XDR/DE

Отзывы:

Похожие инструкции для FTM-400XDR/DE

Бренды по названию

Популярные бренды