Yaesu FTM-350AR, Руководство по эксплуатации

Страница: 22 / 60

FTM-350AR/AE O
PERATING
M
ANUAL
20
I
NTERNET
C
ONNECTION
F
EATURE
The
FTM-350
Series Transceiver can be used to access a “node” (repeater or base station),
which is tied into the Vertex Standard WiRES™ (Wide-Coverage Internet Repeater En-
hancement System) network, operating in the “SRG” (Sister Radio Group) mode. Details
may be found at the WiRES-II Web site: http://www.vxstd.com/en/wiresinfo-en/.
To begin using the Internet Connection feature, first change the [
AD-F
] key to the [
WiRES
]
key function using the following procedure:
1. Press the [
F
] key repeatedly until the [
SMART FUNCTION
] keys change to the “
F-2
”
category.
2. Press and hold the [
AD-F
] key for two seconds to access the Set Mode, then select the
“WiRES” item by rotating the
left side
[
DIAL
] knob.
3. Press the [
ESC
] key to exit from the Set Mode.
SRG
(
“S
ISTER
R
ADIO
G
ROUP
”) M
ODE
1. Press the [
SET
] key to enter the Set Mode, choose the “
SIGNALING
” group, choose
the “
J06 WiRES
” item, and then choose “SRG”. See page 46.
2. Press the [
ESC
] key three times, to exit from the Set Mode, and activate the Internet
Connection feature in the “
SRG
” mode. The “ ” icon will appear on the display.
3. Press the [
WiRES
] key to access the Set Mode. Rotate the
left side
[
DIAL
] knob to
select the access number (“
CODE 0
” ~ “
CODE #
”) corresponding to the WiRES™
repeater, then press the [
ESC
] key to exit from the Set Mode.
4. With the Internet Connection feature activated, the transceiver will generate a brief
(0.1 sec) DTMF tone according to your selection in step 3. This DTMF tone is sent at
the beginning of every transmission to establish or maintain the link to the remote
WIRES™ repeater operating in the “SRG” mode.
5. To disable the Internet Connection feature, select the “
OFF
” selection in the Set Mode
item “
J06 WiRES
”.