Yaesu FTM-350AR, Руководство по эксплуатации

Страница: 27 / 60

FTM-350AR/AE O
PERATING
M
ANUAL
25
GPS O
PERATION (
R
EQUIRES
O
PTIONAL
GPS A
NTENNA
U
NIT
)
“Point” memory
The
FTM-350
Series Transceiver has 16 “point” memories (four channels in each
of four groups), which store the position (Longitude/Latitude) and the date.
When your vehicle nears one of the “Point” memories, the “Nav” pop-up window
will open for ten seconds even if another page is being displayed.
You may customize the length of time the window opens via Set mode item “
H03
NAVI POPUP
” in the “
NAVI
” group. In addition, the “date” may be changed to a
place or name, using the following procedure:
1. Press the [
P

LIST
] key to open the “Point” memory list.
2. Rotate the
left side
[
DIAL
] knob to select the “Point” memory “date” to be
changed.
3. Press the
left side
[
DIAL
] knob to show the detail data of the “Point” memory.
4. Press the
left side
[
DIAL
] knob again to enable editing of the stored data.
5. Rotate the
left side
[
DIAL
] knob to toggle the point alarm function ON/OFF.
When this selection is set to “OFF”, the “Nav” pop-up window does not open
even if your vehicle nears that “Point” memory location.
6. Press the [

] key to move the cursor to the “date” area, and then press the
[
CLR
] key to clear previous data.
7. To enter the desired name, rotate the
left side
[
DIAL
] knob to select a
character/number, and press the [

]
or [

] key to move the cursor.
8. Press the [
ENT
] key to overwrite the date setting.
9. Press the [
BCK
] key to return to the “GPS” page, and then press the [
NAVI
]
key again to initiate navigation.
Important Note
: You cannot change the “Point” memory of the APRS station that
is designated as the destination.
Important Note
When the GPS Antenna Unit is first turned on, it may take several minutes to
complete a fix of your position. This is normal, as the GPS unit is downloding
“almanac” information from the GPS satellites.