Yaesu FTM-350AR, Руководство по эксплуатации

Страница: 21 / 60

FTM-350AR/AE O
PERATING
M
ANUAL
19
B
LUETOOTH®
O
PERATION
O
PERATION
1. When the
Bluetooth ®
Headset is correctly recognized by the
FTM-350
Series Trans-
ceiver, “ ” icon will appear on the transceiver’s display, and the LED indicator on the
Bluetooth ®
Headset will blink blue.
2. Adjust the receiver audio level using the [
VOLUME
(
+
)]/[
VOLUME
(
–
)] switches on
the
Bluetooth ®
Headset.
3. Press the
PTT
switch on the
Bluetooth ®
Headset to transmit. Release the
PTT
switch
to return to receive.
4. If the
BH-2A Bluetooth ®
Headset is used, the microphone gain may be adjusted in
five steps, by pressing the [
VOLUME
(
+
)] or [
VOLUME
(
–
)] switches on the
Bluetooth ®
Headset while holding the
PTT
switch.
5. The communication range between the
Bluetooth
®
Headset and the transceiver is
around 1 m (3 ft). If you move out of range, a beep will be heard from the
Bluetooth ®
Headset to alert you. If you move back into range, the
Bluetooth
®
Headset will beep
to alert you that you are back within range.
6. When the battery voltage of the
Bluetooth ®
Headset is low;
a. the LED on the
Bluetooth ®
Headset will blink Red and Blue.
b. a beep will be heard from the
Bluetooth ®
Headset.
c. the “ ” icon on the transceiver’s display will be blinking fast.
Charge the battery of the
Bluetooth ®
Headset.
In the factory default setting of the
FTM-350
Series Transceiver, the internal and external
speakers, the front panel microphone, and front panel MIC jack are all disabled when the
Bluetooth ®
Headset is correctly recognized. However, the microphone connected to the
transceiver’s
MIC
jack is still alive.
You may customize the
Bluetooth ®
operation via Set Mode items “
K01 BLUETOOTH
”
in the “
OPTION
” group. See page 47.