background image

32

Menu Selection Details

FTM-3200DR Advance Manual

34  RADIO ID

Function:

  Displays the transceiver IDs.

RADIO ID is a 5-digit code consisting of alphanumeric characters that is written into the 
transceiver during factory production.
The RADIO ID cannot be edited.

35  RF SQL

Function:

 Adjusts the RF Squelch threshold level.

Available Values:

 S1 - S8 / OFF

Default:

 OFF

36  RPT ARS

Function:

 Activates/Deactivates the Automatic Repeater Shift feature..

Available Values:

 ON / OFF

Default:

 ON

37  RPT FREQ

Function:

 Sets the magnitude of the Repeater Shift.

Available Values:

 0.00 - 150.00 MHz

Default:

 0.60 MHz

38  RPT SFT

Function:

 Sets the Repeater Shift direction.

Available Values:

 - RPT / + RPT / SIMPLEX

Default:

 SIMPLEX

39  SCAN RSM

Function:

 Selects the Scan Resume mode.

Available Values:

 BUSY / HOLD / 2.0 SEC - 10.0 SEC (0.5 SEC step)

Default:

 5.0 SEC

BUSY: 

The scanner will hold until the signal disappears, then will resume 
when the carrier drops.

HOLD: 

The scanner will stop when a signal is received, and will not restart.

2.0 SEC - 10.0 SEC: The scanner will hold for the selected resume time, then resume 

scanning, whether or not the other station is still transmitting.

40  SCAN SKP

Function:

 Selects the Memory Scan mode.

Available Values:

 SKIP/SELECT/OFF

Default:

 OFF

SKIP: 

The scanner will “skip” the flagged channels during scanning.

SELECT:  The scanner will only scan channels that are flagged (Preferential Scan List).
OFF: 

All memory channels will be scanned (the “flag” will be ignored).

Содержание FTM-3200DR





































Отзывы: