31
Menu Selection Details
FTM-3200DR Advance Manual
4. Repeat the previous step as necessary to complete the message (up to 8 characters).
5. To correct a mistake, press the [
SQL
(
TXPO
)] key to backspace the cursor; now re-en-
ter the correct letter/number.
6. When the desired opening message is completed, press the [
D/A
(
GM
)] key momen-
tarily to confirm the message, then press and hold in the [
MHz
(
SETUP
)] key for one
second to save the settings and exit to normal operation.
28 PAG CD-R
Function:
Setting the Receiver Pager Code for the Enhanced CTCSS Paging & Code
Squelch function
See page 8 for details.
29 PAG CD-T
Function:
Setting the Transmitting Pager Code for the Enhanced CTCSS Paging & Code
Squelch function.
See page 8 for details.
30 PRG P1
Function:
Programming the function assigned to Microphone [
P1
] key.
Available Values:
SQL OFF / HOME / WX CH / CD SRCH / SCAN / T CALL / TX POWER
/ DIG/ANA / GM or one of the all Set mode items (except Set mode items #30 through 33;
initial setting is “Set mode item #8 DC VOLT”).
Default:
SQL OFF
31 PRG P2
Function:
Programming the function assigned to Microphone [
P2
] key.
Available Values:
SQL OFF / HOME / WX CH / CD SRCH / SCAN / T CALL / TX POWER
/ DIG/ANA / GM or one of the all Set mode items (except Set mode items #30 through 33;
initial setting is “Set mode item #22 LCD DMMR”).
Default:
HOME
32 PRG P3
Function:
Programming the function assigned to Microphone [
P3
] key.
Available Values:
SQL OFF / HOME / WX CH / CD SRCH / SCAN / T CALL / TX POWER
/ DIG/ANA / GM or one of the all Set mode items (except Set mode items #30 through 33;
initial setting is “Set mode item #24 MIC GAIN”).
Default:
DIG/ANA
33 PRG P4
Function:
Programming the function assigned to Microphone [
P4
] key.
Available Values:
SQL OFF / HOME / WX CH / CD SRCH / SCAN / T CALL / TX POWER
/ DIG/ANA / GM or one of the all Set mode items (except Set mode items #30 through 33;
initial setting is “Set mode item #40 SCAN SKP”).
Default:
Depends on the transceiver version.