Yaesu FTM-3200DR, Руководство для продвинутых пользователей

Страница: 3 / 36

3
FTM-3200DR Advance Manual
Basic Operation
Microphone Gain Setting
The microphone gain has been programmed at the factory to a level that should be
satisfactory for the supplied MH-48A6JA Microphone. If an after-market microphone is
used, you may wish to set a different Mic Gain level.
1. Press and hold in the [
MHz
(
SETUP
)] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select “ MIC GAIN
24 ”.
3. Press the [ MHz
(
SETUP
)] key, then rotate
the DIAL knob to select the desired micro-
phone gain level (LEVEL 1 - LEVEL 9).
Default: LEVEL 5
4. Press and hold in the [ MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
VOL
DIAL
SQL
TXPO D W M W SETUP
REV D/A V / M M H z
RF Squelch
A special RF Squelch feature is provided on this radio, which allows setting the squelch so
that only signals exceeding a pre-set S-meter level will open the squelch.
Use the following procedure to set up the RF squelch circuit for operation:
1. Press and hold in the [
MHz
(
SETUP
)] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select “ RF SQL 35 ”.
3. Press the [ MHz
(
SETUP
)] key, then rotate
the DIAL knob to select the desired signal
strength level for the squelch threshold (S1 -
S8 or OFF).
Default: OFF
4. Press and hold in the [ MHz
(
SETUP
)] key for
one second to save the new setting and exit
to normal operation.
VOL
DIAL
SQL
TXPO D W M W
SETUP
REV D/A V / M M H z