Yaesu FT3DE Скачать руководство пользователя страница 75

Страница: 75 / 78

⿟

Adjust speaker output level of PC

Adjust the volume level so that the “

VOL bar graph

” is 50% by turning the

VOL

knob of transceiver, and then make the

following adjustments. Also, when using FT5D/FT3D/FT2D as a transceiver of a Portable Digital Node station, adjust it so that

it is almost the same volume level.

1. Click “

OS Volume Mixer

”.

The WINDOWS “

Volume Mixer - Speakers

” window

opens.

2. Click [

Start

] in the “

Test Tone

” area.

A test tone is output.

3. Adjust the volume level of “

WIRES-X

” on the “

Volume

Mixer - Speakers

” screen so that the test audio is heard

from the PC speaker will be easy to hear.

When adjustment is completed, click the [

Start

] button

again, to stop the test sound.

• If the speaker output is muted, click the icon “ ” at

the bottom of the slider to release the mute.

• If the volume level of “

Speaker/Headphone

” is too

low, adjust the volume so that it is easy to hear.

【

This setting is necessary only when using the FT5D/

FT3D/FT2D transceiver

】

Adjust the volume level of the “

Microphone

” on the

“

Volume Mixer - Speakers

” screen so that the voice of

the partner station operating in the digital mode will be

easy to hear.

When the adjustment is completed, proceed to step 7.

Depending on the computer, this setting item may be

missing in the volume mixer. In this case, proceed to step 5.

【

This setting is necessary only when using the FT5D/

FT3D/FT2D transceiver

】

Click the “

Speakers

” icon on the “

Volume Mixer -

Speakers

” screen.

The “

Speakers Properties

” screen opens.

Содержание FT3DE















































































Результаты поиска

Содержание FT3DE

Отзывы:

Похожие инструкции для FT3DE

Бренды по названию

Популярные бренды

Yaesu FT3DE, Инструкция по эксплуатации

Результаты поиска

Содержание FT3DE

Отзывы:

Похожие инструкции для FT3DE

Бренды по названию

Популярные бренды