37
While operating the portable node, the following functions may be set and operated on the portable node FTM-400XD/D
transceiver.
Function
Key or Dial
Return to the transceiver setting screen
Press and hold the
D X
key or press the
P3
key on the micro-
phone (By default setting)
Squelch OFF
Press the
P1
key on the microphone (By default setting)
Adjusts the squelch level
Touch [
SQL
] on the LCD screen, then rotate the
DIAL
knob
Enters the BACKTRACK (COMPASS) screen
Press the
DISP (SETUP)
key
Displays the Function menu Screen*
Press the
F (MW)
key
Turning the display ON and OFF
Press and hold the
DISP (SETUP)
key
Selects the Transmission Power Level
Touch [
TX PWR
] in the Function Menu Screen or press the P4
key on the microphone (By default setting)
Selects Speaker Mute
Press the [
MUTE
] on the LCD screen
Disconnects a node or a room on the Internet
Press the
*
key on the microphone (Press and hold)
*Some items in the Function menu are automatically set for the Portable Digital Node function, so the settings cannot be used.
Setting the speaker mute
The audio output to the speaker of the node station FTM-400XD/D transceiver can be muted, it cannot be set in
Direct Operation.
Touch the [
MUTE
] on the LCD each time toggles the mute mode as follows.
MUTE OFF
MUTE ALL
MUTE TX
MUTE RX
MUTE OFF
・・・
MUTE OFF
: Disable mute.
MUTE ALL
: Mute both the received voice from the C4FM digital station and the voice from the node station on the
Internet.
MUTE RX
:
Mute the received voice from the C4FM digital station.
MUTE TX
:
Mute the voice from the node station on the Internet.
When the MUTE setting is enabled, the [MUTE] in orange on the LCD.
