Yaesu FT3DE, Инструкция по эксплуатации

Страница: 23 / 78

22
Setting the transceiver (Access Point only)
When using the “
Access Point
", it is necessary to set the node station transceiver parameters, such as operating fre-
quency and DG-ID number on the portable node station transceiver.
When using the “
Direct Operation”, it is not necessary to set the frequency and parameters on the transceiver, just
proceed to “ Start operation of Portable Node ” (page 30).
1. To set the operating frequency:
Use the transceiver DIAL knob, the Numeric keypad input screen, or the memory channel to set the operating frequency.
In the “Transceiver Setting Screen ”, the portable Access Point function is not working. You may communicate
normally with C4FM digital mode (DN mode only) with the transceiver.

FT5D
On the frequency setting screen, you can set and operate the following with the transceivers key and DIAL knob settings.
Function Key or Dial
Switches between the Access Point and the Direct Operation Press the A/B key
Starts operation for the Portable Digital Node Press and hold the GM/X key
Sets the operation frequency
Rotate the DIAL knob or press the Numeric
keypad input screen
Displays the Function Menu Screen Press the F
menu
key
Switches between the VFO mode and the Memory Channel mode Press the V/M
●
key
Moves operation to the next-highest frequency band Press the
BAND
key
Sets the transmit and receive DG-ID number Touch [ DG-ID ] on the Function Menu Screen
Selects the Transmission Power Level Touch [ TXPWR ] on the Function Menu Screen
TX/BUSY LED turn OFF/ON Press and hold the PMG
●
key
Enters the Set mode* Press and hold the F
menu
key
Enters the BACKTRACK screen Touch [ DISP ] on the Function Menu Screen
Registering to Memory Channel Press and hold the V/M
●
key
Recalls the “HOME” channel Touch [ HOME ] on the Function Menu Screen
Squelch OFF While
MONI
key is pressed
Adjusts the squelch level Press the SQL key, then rotate the DIAL knob
Reverses the transmit and receive frequencies Touch [ REV ] on the Function Menu Screen
Switches Busy detection between “Noise squelch” and “DG-ID
number match”.
Press and hold the A/B key
*
Some setting items in the set mode are automatically set for the Portable Digital Node function, so these settings cannot be used.