26
6 BELL
Selects the number of CTCSS/DCS/PAGER/ARTS Bell ringer repetitions.
OFF
The beeper does not sound.
1 T – 8 T
The number of times the bell rings may be set from among 1
to 8 times.
CONT
The bell continues to sound until performing key.
7 CWID
Turns the CW Identifier ON/OFF during ARTS operation.
TX OFF
The CW ID does not transmit.
TX ON
The CW ID transmits.
8 CW WRT
Programs and activates the CW Identifier (used during ARTS operation).
See
for details.
9 DC VLT
Displays battery DC voltage.
10 DCS.COD
Sets the DCS CODE RX and TX.
104 standard DCS codes are available. Default setting is 023 R (receive) / 023 T
(Transmit).
See
for details.
11 DT DLY
Sets the DTMF code transmission delay time.
Set the transmission delay time of the registered DTMF code when set “AUTO”.
50MS / 250MS /
450MS
/ 750MS /
1000MS (msec)
While pressing and holding the
PTT
switch, press the numeric
key, set the registered DTMF code delay time.
12 DT SET
Select and edit the DTMF auto dialer memory channel.
Up to 9 registers of 16-digit DTMF tone codes may be stored.
For more details, see “DTMF Operation”.
13 DT SPD
Set the DTMF Autodialer Sending Speed.
50MS
High speed
100MS
Low speed
