20
•
After inputting a character of the call sign, press the [▲] key to move the cursor to
the next character position.
•
To correct a mistake, press the [▼] key repeatedly until the cursor returns to the
character position.
To check the work by monitoring the call sign, press the
MONI/T.CALL
key.
5. When you have finished entering the entire call sign and it contains less than 6 char-
acters, press and hold the Function key to save the call sign.
6. Press the
PTT
switch to save the new setting and return to normal operation.
DTMF Operation
DTMF (Dual Tone Multi Frequencies) are the tone signals sent to make telephone calls,
or control repeaters. Up to 10 registers of 16-digit DTMF tone codes can be stored as
telephone numbers to make calls through the public telephone network using a phone
patch.
Setting the DTMF Memory
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set mode)
(Selecting "12 DT SET")
•
The DTMF memory channel number blinks.
1. Press the [▲] or [▼] key to select DTMF memory channel number to register.
2. Press the Function key.
The DTMF memory channel input screen is displayed.
3. Use the numeric keypad or the [▲] or [▼] key to input the DTMF code maximum of
16 digits.
• The numeric key:
The DTMF codes from 0 to 9 may be input directly.
• The [▲] or [▼] key
The following DTMF codes may be selected.
・
・
・
0 to 9
A to F
・
・
・
“
＊
” is displayed as “E”, “#” is displayed as “F”.
• The Function key
The selected code is entered, the cursor moves to next code.
To correct a mistake, press the Function key repeatedly (or press and hold the
Function key and then press the Function key again) until the cursor returns to the
first code position and then begin the DTMF Memory entry again.
4. When finishing inputing, press and hold the Function key to save the DTMF code.
5. Press the
PTT
switch to save the new setting and return to normal operation.
