29
26 PSWD
Turn the password function ON or OFF.
A 4-digit password may be set to prevent unauthorized operation of the trans-
ceiver without permission.
PWD.OFF
Disables the PASSWORD function.
PWD. ON
Enables the PASSWORD function.
z
Set Mode “26 PSWD” cannot be set to “PWD. ON”, until the 4-digit password has been set
in the Set Mode “27 PSWDWT”.
z
If the password is forgotten, the password cannot be deactivated without the all reset.
If performing the all reset, all the transceiver settings are initialized. Do not forget the
passwords.
27 PSWDWT
Input the 4-digits password (4-digits only).
1. Press the Function key to enable the cursor.
2. Press the numeric key to input the 4-digits password.
•
[▲] key: Moves the cursor to the right.
•
[▼] key: Moves the cursor to the left.
3. Press the
PTT
switch to save the setting and return to normal operation.
28 RF SQL
A special RF Squelch feature may be set so that only signals exceeding a cer-
tain S-meter level will open the squelch.
OFF
Normal squelch operation. RF Squelch is OFF.
S-1 – S-FULL
Only signals exceeding the set S-meter level will open the
squelch.
29 RPT.ARS
Set the ARS (Automatic Repeater Shift).
Enable or disable the automatic Repeater Shift operation ARS (Repeater opera-
tion is initiated by tuning to the repeater frequency).
ARS.ON
Set the repeater shift offset frequency.
ARS.OFF
Disables the ARS function.
See the Operating Manual for details.
30 RPT.FRQ
Set the Repeater Shift offset frequency.
0.025M – 99.975M
Set the repeater shift offset frequency.
