19
4. Press the Function key (or press and hold the [
2
] key) to exit ARTS operation and
resume normal transceiver operation.
ARTS Polling Time Options
The ARTS feature may be programmed to poll every 25 seconds (default setting) or 15
seconds. The default setting provides maximum battery conservation, because the poll-
ing signal is sent out less frequently.
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set mode)
(Selecting "3 AR INT")
1. Press the [▲] or [▼] key to select the desired polling
interval (15 or 25 seconds).
2. Press the
PTT
switch to save the new setting and return to normal operation.
ARTS Alert Beep Options
The ARTS feature permits two types of alert beeps (or may be turned off).
Display
Description
OFF(Default setting)
No beeps.
INRANG
Beeps sound only when the transceiver first confirms a station is with-
in range, but does not re-confirm with beeps thereafter. Display is the
same function as “
OFF
”.
ALWAYS
Each time a polling transmission is received from the other station,
the alert beeps will sound. Display is same function as “
OFF
”.
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set mode)
(Selecting "2 AR BEP")
1. Press the [▲] or [▼] key to select the above type.
2. Press the
PTT
switch to save the new setting and return to normal operation.
CW Identifier Setup
The transceiver may be programmed to send a CW identification (e.g. call sign) every
ten minutes during ARTS operation. The call sign field may contain up to 6 characters.
Press and hold
the Function key
→
Press the
p
or
q
key
→
Press the Function key
(Entering the Set mode)
(Selecting "7 CWID")
1. Press the [▲] or [▼] key to select “
TX ON
”.
2. Press the Function key, then press the [▲] or [▼] key to
select “
8 CW WRT
”.
3. Press the Function key twice, the cursor blinks to input
the call sign.
4. Press the Alphabet/Numeric keys to input the call sign.
