13
Follow the steps below to pair your YD-V43 with your mobile phone:
• Power ON the device
• Press and hold
M
for 2 seconds
• Screen will indicate
pairing Mode
NOTE:
YD-V43 is now in pairing mode
• Activate the Bluetooth® settings of your mobile phone
NOTE:
The following steps are general procedure; to access Bluetooth® Menu for your mobile phone,
please refer to your phone user manual.
• Select SET-UP or CONNECT from your mobile phone menu
• Find and select OPTION to discover Bluetooth® devices; establishing a connection may take several
minutes
• If found, phone display should indicate
YD-V43
device was detected or Select “
YD-V43
” from the list
• Phone should give you a prompt asking if you want to pair the device
• Select OK or ACCEPT and wait for prompt to enter passkey or PIN
• Enter the code
0000
• Select “OK” to pair and connect the YD-V43 and the handset
• When pairing is complete, the YD-V43’s LCD will show
Connected
(phone’s iD)
NOTE:
The YD-V43 can pair with more than one phone, however it can only connect to one phone at a
time. If you wish to pair to a second phone, disable or turn OFF Bluetooth® on the phone already paired.
NOTE:
If the YD-V43 and mobile handset did not successfully pair, follow the steps below to retry
pairing:
• Turn the YD-V43 OFF & ON
• Turn OFF all other Bluetooth® devices before starting the pairing process
• Repeat the pairing instructions from the beginning
To Link YD-V43 to your mobile phone after pairing:
• Press of your YD-V43 or
• Establishing the connection via your mobile phone
NOTE:
Make sure Bluetooth® has been activated on your mobile phone before you press
�
(Please refer to your mobile’s operation manual about connecting Bluetooth® devices)
Содержание YD-V43
Страница 1: ...rearview mirror backup camera speakerphone...