3
, the upper
limit
of
frequency
setting
P03.13
Analog input
1, the upper
limit
of
frequency
setting(VI1--
0-10V)
0.0-400.0HZ
,See
"JP1
Short Circuit
Block
Configuratio
n Table"
50.0HZ
400.0HZ
60.0Hz
P12.19
PWM
frequency
2.0-15.0KHZ 110V10.0KHz------220V8.0KHz
Note: If you need to restore the factory settings, set P00.13 to 10, press the confirm key, then
turn off the power supply and wait for the inverter lights to go out before powering on,
otherwise the restoration will be unsuccessful.
If you need to modify the parameters, you must set the inverter in a non-working state (such as
the RUN light is off). After the setting is completed, you must turn off the power and turn off
the inverter lights before powering on, otherwise the setting will be unsuccessful.
