19
P03.19
Analog output gain setting,
see "JP1 short-circuit block
configuration table"
P04.00
Mo analog multiplier output
frequency multiplier
P04.01
Mo1 function selection
P04.02
Mo2 function selection
P04.03
Multifunction relay 1
function selection
0: get power when fault occurs, otherwise
lose power
1: get power while running, otherwise lose
power
2
：
Reserved
3
：
When any frequency arrives, it will be
powered, otherwise it will lose power
(related to the setting of P02-10)
4
：
Get power when power is off, otherwise
lose power
5
：
Get power at low voltage, otherwise lose
power
6
：
Get power when overvoltage, otherwise
lose power
7
：
Get power when over current, otherwise
lose power
8
：
Power is available at non-zero speed,
otherwise power is lost*
9
：
Power on when DC braking, otherwise
lose power
10
：
Power is applied when the torque is
over, otherwise power is lost*
11
：
Power is supplied when external
interruption fault occurs, otherwise power
is lost
12
：
Get power when rotating forward,
otherwise lose power
13
：
Get power when reverse, otherwise
lose power
14
：
Power when inching, otherwise lose
power
15
：
Get power when accelerating,
otherwise lose power
16
：
Get power when decelerating,
otherwise lose power
17
：
Get power at constant speed, otherwise
lose power
18
：
When X1 is closed, power is on,
0
P04.04
Multifunction relay 2
function selection
