Xylem WTW Oxi 3310, Руководство по эксплуатации

Страница: 41 / 64

Oxi 3310 Operation
41 ba75804e08 10/2017
Terminating the
automatic memory
function prematurely
Proceed as follows to switch off the automatic data storing function
before the adjusted storing duration has expired:
4.5.3 Displaying and editing the measurement data memory
The contents of the manual or automatic measurement data memory
can be shown on the display.
Each of the measurement data memories has a function to erase the
entire contents.
The contents of the manual or automatic measurement data memory
can be shown on the display and output to the interface.
Editing the data memory The memory is edited in the menu, Storage & config / Data storage . To
open the Storage & config menu, press the <F1
_
> /[Menu] key in the
measured value display. Open the manual or automatic memory
directly with the
<RCL> or <RCL
_
> key.
Note
The settings are explained here using the manual data memory as an
example. The same settings and functions are available for the auto-
matic data memory.
1 Press the <STO
_
> key.
The following window appears.
2 Using <

><

> , select Yes and confirm with <ENTER> .
The meter switches to the measured value display.
The automatic data storing function is terminated.
Stop automatic storage?
Yes
No
Warning
15.03.2014
08:00
Back