Xylem WTW Oxi 3310, Руководство по эксплуатации

Страница: 38 / 64

Operation Oxi 3310
38 ba75804e08 10/2017
4.5.1 Manual storage
You can store a measurement dataset to the data memory as follows.
The dataset is at the same time output to the interface:
If the memory is full The following window appears if all 500 storage locations are occupied:
You have the following options:

To erase the entire memory, confirm Yes .

To cancel the storing process and switch to the measured value dis-
play, confirm
No . Then you can e.g. store the data from the memory
to a PC (see section 4.5.3) and subsequently erase the memory
(see section 4.5.4).
1 Press the <STO> key shortly.
The menu for manual data storage appears.
2 If necessary, change and confirm the ID number (1 ... 10000)
with
<

><

> and <ENTER> .
The dataset is stored. The meter switches to the measured
value display.
15.03.2014 11:24:16
O2 7.92 mg/l 24.8 °C AR +++
ID number: 1
Continue
Manual data storage
4
From
500
15.03.2014
08:00
Back
Data storage full. Erase?
Yes
No
Warning
15.03.2014
08:00
Back