Xylem WTW Oxi 3310, Руководство по эксплуатации

Страница: 26 / 64

Operation Oxi 3310
26 ba75804e08 10/2017
4.3.2 Data storage
This menu contains all functions to display, edit and erase stored mea-
sured values and calibration records.
Note
Detailed information on the memory functions of the Oxi 3310 is given
in section 4.5.
4.3.3 Automatic Stability control
The function, automatic Stability control (AutoRead) continually checks
the stability of the measurement signal. The stability has a considerable
impact on the reproducibility of measured values.
You can activate or switch off the automatic Stability control function
(see section 4.4.3).
The measured parameter flashes on the display

as soon as the measured value is outside the stability range

when you switch over between the measured parameters with <M> .

when the automatic Stability control is switched off.
System / Interface /
Output format
ASCII
CSV Output format for data
transmission
For details, see section 4.6
System / Interface /
Decimal separator
Dot (xx.x)
Comma (xx,x) Decimal separator
System / Interface /
Output header
Output of a header for Out-
put format : CSV
System / Clock Time
Date
Date format Time and date settings
(see section 4.2.4)
System / Service infor-
mation
Hardware version and soft-
ware version of the meter
are displayed.
System / Reset - Resets the system settings
to the delivery condition
(see section 4.8.2).
Menu item Setting Explanation