Xylem WTW Oxi 3210, Руководство по эксплуатации

Страница: 29 / 52

Oxi 3210 Operation
29 ba75795e07 10/2021
1 Freeze the measured value with
<AR>
.
The [HOLD] status indicator is displayed.
The HOLD function is active.
2 Using
<ENTER>
, activate the Stability control function manu-
ally.
The [AR] status indicator appears while the measured value is
assessed as not stable. A progress bar is displayed and the
display of the measured parameter flashes.
The [HOLD][AR] status indicator appears as soon as a stable
measured value is recognized.
Note
You can prematurely terminate the Stability control function manually
with
<ENTER>
at any time. If the Stability control function is prema-
turely terminated, the current measurement data are output to the
interface without the AutoRead info.
3 Using
<ENTER>
, start a further measurement with stability
control.
or
Release the frozen measured value again with
<AR>
or
<M>
.
The [AR] status display disappears. The display switches back
to the previous indication.