Xylem WTW Oxi 3210, Руководство по эксплуатации

Страница: 19 / 52

Oxi 3210 Operation
19 ba75795e07 10/2021
4.2.2 Navigation
Measured value display In the measured value display, you can

Open the menu for calibration and measurement settings with
<F1>
(short keystroke)

Open the Storage & config menu with the sensor-independent set-
tings with
<F1__>
(long keystroke (approx. 2 s).

Change the display in the measurement window by pressing
<M>
(e.g. D.O. concentration
−>
D.O. saturation index
−>
D.O. partial
pressure
−>
).
Menus and dialogs The menus for settings and dialogs in procedures contain further sub-
elements. The selection is made with the
<

><

>
keys. The current
selection is displayed with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the
frame. Submenus are opened by confirming with
<ENTER>
. Exam-
ple:

Settings
Settings are indicated by a colon. The current setting is displayed on
the right-hand side. The setting mode is opened with
<ENTER>
.
Subsequently, the setting can be changed with
<

><

>
and
<ENTER>
. Example:
General
Clock
Service information
Reset
System
15.03.2014
08:00
Back
Language: Deutsch
Illumination
:
On
Contrast
:
48 %
Switchoff time
:
30 min
General
15.03.2014
08:00
Back