Xylem WTW Multi 9430, Руководство по эксплуатации

Страница: 90 / 132

Settings Multi 9430
90
ba75966e04 04/2015
Calibration /
Calibration data stor-
age
/
Display
- Displays the calibration
record.
Further options:
 Scroll through the cali-
bration records with
<

><

> .
 Output the displayed cal-
ibration record to the
interface with
<F2> /
[USB-Ausgabe] .
 Output all calibration
records to the interface
with
<F2_> [USB-Aus-
gabe] .
 Quit the display with
<F1> / [Back] or
<ENTER> .
 Switch directly to the
measured value display
with
<M> .
Calibration /
Calibration data stor-
age
/
Output to RS232/
USB
- Outputs the calibration
records to the interface.
Man. temperature -25 ... +25 ... +130 °C Entry of the manually deter-
mined temperature. For
measurements without tem-
perature sensor only.
Alternative tempera-
ture on
off
Takes the measured tem-
perature value from an IDS
sensor.
This menu item is only avail-
able if an IDS adapter and
an IDS sensor with temper-
ature sensor are connected.
Temperature from
channel
▭▭▬
▭▬▭
▬▭▭
Selection of the channel
from which the temperature
value should be taken over.
This menu item is only avail-
able if two IDS sensors are
additionally connected.
ISE setup /
AutoRead criterion
low
medium
high
Selection of the AutoRead
criteria (see section 6.1.1
M
EASURING THE ION CON
-
CENTRATION
, page 47).
Menu item Possible setting Description