Xylem DIQ/S 281, Руководство по эксплуатации

Страница: 93 / 148

DIQ/S 281 Settings/setup
93
ba76226e02
03/2023
number in the right lower corner. The latest message is always on the first posi-
tion.
Pressing <M> hides the alarm messages and switches to the measured value
display. After one minute the alarm messages appear again if what caused them
is still present.
5.6.4 Alarm output as relay action
The relay outputs of the DIQ/S 281 can be configured so a relay action is trig-
gered when an alarm event occurs (Open or Close). For this the
Alarm contact
function must be set for the relay output in the
Settings of outputs and links
.
The
Alarm contact
function is only available for relays that are not linked with a
sensor. If necessary, an existing link must be erased. For details please refer to
the operating manual of the output module.
5.7 System settings
System settings include:

Language
(see section 5.1)

Date/Time
(see section 5.7.1)

Location altitude/Air pressure
(see section 5.7.2)

Settings bus interfaces
(variant DIQ/S 281-MOD)

Function code
5.7.1 Setting the date and time
The real time clock is used for the display of date and time in the measured value
display and in log book entries.
1 Open the
Einstellungen/Settings
menu with <S> .
2 Using <

> and <OK> , select and confirm the menu item,
System
settings
->
Date/Time
.
The
Date/Time
display opens.
3 Press <  > to select
Set date
or
Set time
.
4 Confirm the selection with <OK> .
A field is highlighted, e.g.
Year
.