Xylem DIQ/S 281, Руководство по эксплуатации

Страница: 71 / 148

DIQ/S 281 Operation
71
ba76226e02
03/2023
With the
Acknowledge all messages
function you can acknowledge all
messages at the same time (see section 4.5.4).
If a message text is not available because, e.g. a module is not connected with
the system, you can look up the detailed text of the message as follows:
 Messages of the system are given in this operating manual (see
section 11.1).
 Messages of a module are given in the respective component operating man-
ual of the module.
4.5.4 Acknowledge all messages
figure 4-10
Log book of entire system
5 Acknowledge the message with <OK> . A checkmark appears in the log
book entry.
6 Exit the message text with <ESC> .
Acknowledgment of a new message text in the log book marks the
message as read. When all errors or information messages are
acknowledged, the symbols no longer flash.
Message texts are stored in the modules that caused them. There-
fore, further information on a log book entry for an IQ sensor such
as, e.g. calibration messages, instructions and help texts are only
accessible in the case of connected components that are ready for
operation.
1 Switch to the measured value display with <M> .