Xylem DIQ/S 281, Руководство по эксплуатации

Страница: 85 / 148

DIQ/S 281 Settings/setup
85
ba76226e02
03/2023
Switching off the
instrument block
5.3.3 Electronic key
The administrator can simplify access to the DIQ/S 281 by saving the password
to USB memory. The USB memory thereby becomes an electronic key.
When the electronic key is connected to the DIQ/S 281, the user right stored
there with the relevant password is automatically read out. The user of the elec-
tronic key is logged on to the system with his user right without any further pass-
word prompt.
When the electronic key is disconnected, the DIQ/S 281 automatically switches
to the lowest user right.
Passwords for different IQ S
ENSOR
N
ET
systems can be saved to every elec-
tronic key.
For each IQ S
ENSOR
N
ET
system only one password can be saved to each elec-
tronic key.
Saving a password
to an electronic
key
3 Press <  > to select the
Apply settings
function and confirm with
<OK> .
A security prompt opens.
4 Using <

> , select
OK
and confirm with <OK> .
The settings are adopted.
The
Access control
dialog window is still open.
The current passwords are visible.
1 Press <OK> to open the
Display/Options
/
Change user rights
menu.
The password query is displayed.
2 Enter and confirm the administrator password with <  > and
<OK> .
3 Open the
Einstellungen/Settings
menu with <S> .
Deactivate the access control.
Take over the setting.
1 Connect the USB memory to the USB-A interface.
Administrator rights are required when the access control is active.
2 Open the
Einstellungen/Settings
menu with <S> .