A variety of sensor options are available for integrated sensor systems, such as the integrated Surface Velocity Radar
/ Laser Level combination station in Figure 2.
3.
Unpacking
When unpacking, take care to keep the packet of parts
supplied with the station, which includes:
•
The fuse and fuse cap
•
Gland options
•
Mounting kit options (if applicable)
•
Charging cable (if applicable)
•
Cable tie for SIM card
4.
Overview
4.1
Opening Electronics Housing
Both the top and bottom plates may be opened to access in internal components. Fully unscrew
the 6 screws holding the lid in position to open. Both top and bottom plates have an o-ring seal
and may experience suction when trying to remove the plates. A suction cup may be used to pull
out the plate, or a screw driver can be used to push the plate out from underside. When the top
plate is removed, the top electronics can be lifted out. This is typical performed when installing
or changing a SIM card
Figure 2
–
Non-contact flow sensors
SIM card slot. Secure with small cable tie
(included in parts kit with cellular models)
