9460/9460KP/9462/9462KP System Manual
4-6
Paste
Insert a sequence of scan codes (which were saved in memory using Copy) into the
macro. To paste a sequence of scan codes that were previously copied, position the cur-
sor where you want the text to appear and then press
F
1.
Select
Paste
and then press
ENTER
.
Codes
Displays a table of keys and their scan codes in Hex. See the
Codes
section later in this
chapter for a complete code listing.
Hex/Decimal
Toggles between displaying the scan codes in Hex and Decimal formats.
Insert
Toggles between insert and overtype mode.
Upload Menu
Use the Upload Menu to choose which data to load. Choices in this menu are: Combo
keypad, PKIM Version, and Exit
.
Combo Keypad
Commands the keyboard controller to send its entire macro set for the keypad.
PKIM Version
Commands the keyboard controller to send its firmware revision number.
Exit
Returns to the Main Menu.
Note
Only one macro set may reside in memory at one time.
A checksum will be calculated during transmission and an error message displays if an er-
ror occurs.
