Chapter 3-Installation
3-27
6.
Implement the proper grounding techniques. Establish a ground path from the
unit chassis to the enclosure chassis. A 6-32 threaded ground point hole is
provided on the bottom panel of the unit (see Figure 3-5).
7.
Tighten the 12-#10 nuts to 25 lbs-inch (2.8 Newton-meters) (28Kgf cm).
System Cutout Dimensions
3510/3512
1.3
15 [
33.
40]
.315 [8.00]
2.150 [54.61]
6.150 [156.21]
10.150 [257.81]
12.300 [312.42]
1.6
50
[4
1.9
1]
5.
15
0 [1
30
.8
1]
8.
65
0 [
219
.7
1]
10
.3
00
[2
61
.6
2]
11.670 [296.42]
9.630 [244.60]
ø.250 [ø6.35]
Figure 3-18. 3510/3512 System Cutout Dimensions (inches [mm])
