Xycom 1614 Series Скачать руководство пользователя

Страница: 8 / 49

Power ON/OFF switch:

This switch should be positioned to OFF (O) until the system is prop-

erly configured and connected to an appropriate power source.

Reset switch:

This switch restarts the computer.

PS Reset switch:

The power supply reset switch resets the power supply (PS) alarm trig-

gered by a power supply interruption. This switch is present only on units with dual
redundant 300 watt AC power supply.

Power LED indicator light:

This LED glows green when power is applied to the 1614.

HDD1 LED indicator light:

This LED glows green to indicate the hard drive is being accessed.

HDD2 LED indicator light:

This LED glows green to indicate a second hard drive is being ac-

cessed (only if a second CPU is installed—not available at this time).

PS Alarm LED indicator light:

This LED is available only with a dual redundant 300 watt AC

power supply unit and flashes when one of the power supplies malfunctions. To reset
the PS Alarm, press the PS Reset switch.

PS1 LED indicator light:

This LED is available only with a dual redundant 300 watt AC

power supply unit and glows green when the first power supply is functioning
properly.

PS2 LED indicator light:

This LED is available only with a dual redundant 300 watt AC

power supply unit and glows green when the second power supply is functioning
properly.

PS/2 mouse connector:

A mouse can interface with the system through this six-pin

PS/2-compatible connector.

•

Refer to page 42 for pin assignments for the mouse connector.

Note:

Do not connect a mouse to this front connector if a mouse is plugged into the key-

board connector on the rear panel. Doing so may cause each mouse to operate improperly.

Product Overview

Figure 2. Front view with the
door open.

A, Power ON/OFF switch

B, Reset switch
C, PS Reset switch
D, Power LED indicator light
E, HDD1 LED indicator light

F, HDD2 LED indicator light

G, PS Alarm LED indicator light
H, PS1 LED indicator light
I, PS2 LED indicator light

J, PS/2 mouse connector
K, PS/2 keyboard connector

L, 3.5" drive bays
M, 5.25" drive bays
N, Removable drive lock

Содержание 1614 Series


















































Результаты поиска

Содержание 1614 Series

Отзывы:

Похожие инструкции для 1614 Series

Бренды по названию

Популярные бренды

Xycom 1614 Series, Руководство по оборудованию

Результаты поиска

Содержание 1614 Series

Отзывы:

Похожие инструкции для 1614 Series

Бренды по названию

Популярные бренды