Warning:
Install the unit in a manner that does not create an unsafe load condition
when mounted in the rack. You may need to reconfigure other equipment in the rack.
To Mount the Unit with Slide Rails
Warning:
Proper installation permits the rack to remain stable and upright while the
unit has been slid fully out of the rack.
1.
Disconnect all cables and cords from the unit.
2.
Place the unit on a solid work surface.
3.
Attach the slide rails to the unit (Xycom Part number 1600-RMS).
4.
Install the unit securely in the rack with standard rack-mounting hardware so that
the drive access door faces outward.
5.
Torque the rail-mounting screws to 35 in/lbs (3.95 Nm).
27
Installation
Figure 13. Installing
optional slide rails.
Torque screws to 35 in/lbs (3.95 Nm)
