Xyclop user manual for 16 channel network video recorder
------------------------------------------------------------------------------------------------------------------------------------------
15
Do not press the POWER button again when the system is shutting down.
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
Steps:
1.
Enter the
Shutdown
menu by clicking Menu > Shutdown.
2.
Click the
Logout
button to lock the NVR or the
Reboot
button to reboot the NVR.
2.2
Using the Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2. 2.
Figure 2. 2
Start Wizard Interface
Operating the Setup Wizard:
1.
The Setup Wizard can walk you through some important settings of the NVR. If you don’t want to use the
Setup Wizard at that moment, click the
Cancel
button. You can also choose to use the Setup Wizard next
time by leaving the “Start wizard when the device starts?” checkbox checked.
2.
Click
Next
button on the Wizard window to enter the
Login
window, as shown in Figure 2. 3.
Figure 2. 3
Login Window
