Xyclop user manual for 16 channel network video recorder
------------------------------------------------------------------------------------------------------------------------------------------
145
10.6
Configuring Disk Clone
Purpose:
If the S.M.A.R.T. detection result declares the HDD is abnormal, you can choose to clone all the data on the HDD
to an inserted eSATA disk manually. Refer to
Chapter 12.8 HDD Detection
for details of S.M.A.R.T detection.
The capacity of the clone source and the clone destination must be the same.
Before you start:
An eSATA disk should be connected to the device.
Steps:
1.
Enter the HDD Advanced Setting interface:
Menu > HDD > Advanced
2.
Click the
Disk Clone
tab to enter the disk clone configuring interface.
Figure 10. 18
Disk Clone Configuration Interface
3.
Make sure the usage of the eSATA disk is set as Export.
If not, click the
Set
button to set it. Choose Export and click the
OK
button.
Figure 10. 19
Setting eSATA Usage
