Xyclop user manual for 16 channel network video recorder
------------------------------------------------------------------------------------------------------------------------------------------
130
9.2.13
Virtual Host Settings
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1.
Enter the Advanced settings interface, as shown in the Figure 9. 31.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 9. 31
Advanced Settings Interface
2.
Check the checkbox of the
Enable Virtual Host
.
3.
Click the
Save
button to save the setting.
4.
Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list, as shown in the Figure 9. 32.
Configuration > Remote Configuration > Camera Management > IP Camera
Figure 9. 32
Connect to IP Camera
5.
Click the link and the page of IP camera management appears.
9.2.14
Telnet Settings
Purpose:
Telnet function provides an easy way to get access to the NVR. You can see the advanced information about the
device by inputting command; as well the configuration can also be realized through telnet connection.
