Xxxlutz Jimmy Lee, Руководство пользователя

Страница: 37 / 58

EN
1.
Mounting the jogger wheel
(jogger configuration)
If the drawbar or the buggy wheels are mounted on the bicycle trailer, first dismantle these elements.
The jogger set consists of two wheel arms, a jogger wheel and a catch strap. The two wheel outriggers
are mounted in a similar way to the drawbar. The left-hand outrigger is inserted into the receptacle of
the drawbar and the right-hand outrigger is inserted into an identically constructed receptacle on the
right-hand side.
1. Lift the trailer at the front or tilt it backwards.
2. open and remove the blue clips. Then insert the wheel arms into the receptacles. The blue
adjustment wheels must point downwards.
3. Fix the wheel arms with the help of the blue clamps. To do this, insert both steel bolts of the clamp
into the holes on the side of the bicycle trailer and close the clamp. The clamp is securely closed as
soon as you hear a loud clack.
Note: Opening and closing the clamp is not smooth and requires a certain amount of force.
This is necessary to guarantee a secure hold of the clamp.
4. Now insert the jogger wheel into the dropouts of the wheel arms and tighten the axle nut, then close
the quick-release lever. Check that the wheel and outriggers are fixed by pulling on them.
Warning! The jogger wheel and the wheel outriggers must be correctly fixed after assembly.
Riding with an incorrectly fastened jogger set can lead to accidents with life-threatening
injuries. If in doubt, contact a specialist workshop!
Tip: If the trailer does not drive exactly straight ahead in the jogger configuration, the track can be
adjusted by turning the adjusting rings on the dropouts.
2.
4. 3.
2.