![XVTEC XVC-ULTRA Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/xvtec/xvc-ultra/xvc-ultra_user-manual_891594021.webp)
XVC-ULTRA Encoder
User’s Guide
Page 21 of 50
Note
:
The interval selected depends on the application and network conditions. For low bitrate
transmissions, the interval value should be high – allowing the encoder to reduce traffic volume
by sending more P (Predictive) frames.
•
Minimum value: 1 frame
•
Maximum value: 1000 frames
•
Recommended values: 30-120
GOP structure
The Group of Pictures (GOP) structure used:
•
IPPP - Only P frame is used.
•
IBP, IBBP, IBBBP, IBBBBP - B and P frames are used.
The structure determines whether an I-frame is followed by P-frames (Predictive coded picture)
or B-frames (Bi-predictive coded picture).
Audio Encoder Settings
Audio source
The interface used to input audio signals into the encoder:
•
HDMI
Audio for encoding is taken from HDMI (Embedded audio).
•
LINE IN
Audio for encoding is taken from LINE-IN, gen-locked to video.
Audio enable
If checked, encoded stream will include audio
Detected sample rate
The detected audio sampling rate used.
Note
: Only 48 KHz,44.1Khz and 32Khz are supported for
HDMI
audio, and 48Kh for
Line-in.
Bit rate
The bit rate of the encoded audio . Valid values are between 64,000 and 256,000 bps. Default is
80,000 bps.
In LPCM16, the audio bitrate is fixed to Fs*16*2, e.g., for Fs = 48Khz, the audio bitrate will be
1.536Mbit/sec
Coding
The audio compression method:
•
AAC-LC, LPCM16 and OPUS.
Note
: For Low latency encoding, LPCM16 and OPUS is supported.
Streaming Settings
Streaming mode
The streaming mode selected. The following modes are supported:
•
- Transport Stream over UDP.
•
– TS over RTP/UDP.
•
- Real-Time Protocol over UDP.
•
- Real-Time Streaming Protocol.
•
- Secure Reliable Transport streaming protocol
•
– Real Time Messaging Protocol
Details on configuring the individual streaming modes are found in the following section.
Содержание XVC-ULTRA
Страница 1: ...XVC ULTRA Encoder User s Guide V5 ...