7
5. Operating Instructions
Two methods are available for carrying out the operation by the system controller.
1.
Press the combined hot keys to operate different functions. Refer to the system controller manual for the detailed commands.
2.
Access the OSD menu and operate according to the following instructions.
INITIAL INFORMATION
When you power up or restart the dome, the initial information below will display on screen when the dome is conducting self-
testing. The information will disappear after the dome receives the first effective command.
Dome S/N:
The dome’s serial number
Dome ID:
The dome ID address set by DIP switch or keyboard.
Baudrate:
Baud rate for dome control bus.
Protocol:
The dome’s controlling protocol. (please refer to Appendix I for more details)
Model:
The dome model number.
Fan Speed:
The speed of current running fan calculated by rounds per minute.
Temp:
The dome inside temperature. Unit C or F
5.1 SYSTEM MENU
z
Access the dome’s main system menu on your monitor by calling preset 95 once or calling preset 1 twice within 5 seconds.
Note: The way to call a preset may vary among keyboards from different manufactures. Please read those manuals to learn keyboard
operation.
z
When there is password protection, user needs to input the correct 6-bit password to access the OSD menu. (Original
password is 000000).
z
To input password, move the joystick up or down to select number (0-9), move the joystick left or right to choose password
digit. If the input password is wrong, the password input window will close.
Note: You still can control the dome with a wrong password, but can not access to the OSD menu.
The opened menu will disappear automatically without receiving any operation command in 1 minute. All the settings will be
saved automatically to protect against power cuts.
Dome S/N
:0000000000000000
Dome ID
:0001<Hard>
Baudrate
:4800
Protocol
:FACTORY
Model:
:
Version
: 1.00
Pan Speed
:6500
Temp
:037C
H-Check
:Pass
V-Check
:Pass
Camera
:Pass
Ready
System Menu
1. System Information
2. Lens Parameters
3. Camera Parameters
4. Pan/Tilt Parameters
5. Auto Running Setup
6. Timer Running Setup
7. Privacy Masking
8. Alarm Setup
0. Exit
Содержание XPS036
Страница 6: ...6 4 System Connection ...
