22
A pattern records a continuous movement of the camera in a period of time. The difference between sequence and pattern is that
in a sequence, dome moves from a preset to next at a fixed speed; in a pattern, dome moves flexible curve at various speed.
Speed Dome can record 4 patterns, minimum 180 seconds each pattern.
z
Number:
Indicates the current pattern number. Values are 001~004. Pan right then tilt up or down to select another pattern
z
Title:
Title is the title of the Pattern. Assigning a name to a Pattern helps user to remember which pattern it is.
z
Record:
To start recording the pattern. The recording begins immediately after calling preset 1 or call preset 2 to cancel the
recording.
Column on the left shows the time lapse and volume of the pattern memory.
Note: Pattern memory only records the operation of pan/tilt and lens command.
z
Show:
To run the current pattern once. Use this function to check the pattern.
z
Run:
To run the current pattern continuously. System will loop the pattern.
z
Delete:
To delete current pattern.
5.7.4 Panning Setup
System Menu > Auto Running Setup > Panning Setup
Panning enables user to scan back and forth an area between two parallel sites(with same vertical degree) at a definable speed.
e.g. If two sites (A & B) are set, the camera will loop between the two sites: A B A B.
Notes:
z
Dome makes horizontal movement only.
z
This dome has a maximum of 4 Panning settings.
z
If the camera has been zoomed to a desired level then during panning, the camera will keep that zoom.
z
Number:
Display the current panning number. Values are 001~004. Pan right then tilt up or down to select other panning.
z
Title:
Designate the title of the panning. Assigning a name to a panning helps user to remember which panning it is.
z
Start:
To set the start position. Move the camera to a particular position and call preset 1 to save or call preset 2 to cancel.
Call Preset 1 Start
Call Preset 2 Cancel
Call Preset 1 End
Pattern 01
[00:01:30]
Call Preset 1 Save
Call Preset 2 Cancel
Panning
1. Number
:001
2. Title
:AutoPan1
3. Start
4: End
5. Speed
6. Show
7. Run
8. Delete
0. Back
Содержание XPS036
Страница 6: ...6 4 System Connection ...
