15
5.4.6 Iris ALC
To set the iris average level control value. The value could be 000~255.
z
Default value:
22X Colour Camera: 066, 23X Colour/Mono camera: 084 (different camera has different ALC default value)
Note: Changing default value is strongly NOT recommended.
5.4.7 Iris PLC
To set the iris peak level control value. The value could be 000~127.
z
Default value:
23X Colour/Mono camera: 016 (different camera has different PLC default value)
Note: Changing default value is strongly NOT recommended.
5.4.8 Day/Night Mode
To set the dome Colour/Monochrome switching mode. Colour mode is suitable to work in daytime because it needs higher
illumination. By contrast, light sensitivity of mono mode is much higher. It is suitable to work at night in low illumination
environment but the video is black and white.
z
Auto:
The dome will automatically change modes in accordance with the environment illumination.
z
Day:
The dome is always in colour mode.
z
Night
: The dome is always in monochrome mode.
z
Time
: Set schedule for mode change.
Note: You need to set exposure mode to Auto in order to get Auto Day/Night mode
5.4.9 Time
Set the Day Mode start time and Night mode start time. If the two times are same with the other, the camera will stay in current
mode all the time.
Note: Iris PLC, IRF Control, Day Mode Time, Night Mode Time can only be set in certain camera models.
5.5 Camera Parameters
System Menu > Camera Parameters
5.5.1 Sensitivity Up
In extremely low illumination circumstance, the images retrieved by the dome are very dark. Slow shutter gathers more light,
pictures will be brighter.
z
OFF:
Disable this function. (default) 1/1.5, 1/3, 1/6, 1/12, 1/25: The smaller value represents brighter pictures.
Note:
z
High sensitivity will make video sluggish.
z
Sensitivity up is only available when AE mode is Auto.
Camera Parameters
1. Sensitivity Up
2. AE Mode
3. Preset Freeze
4. White Balance
5. BLC Mode
6. Video Phase
7. Focus Min Limit
0. Back
Содержание XPS036
Страница 6: ...6 4 System Connection ...
