44
Version 1 – GBR (25/10/2022)
D-502-0287
-
Fit the EPP unit lid (position 6) onto the bottom rail of the unit so that the bottom edge of the lid and the
top edge of the unit rail are pressed together.
-
Screw back the 5x M6x25 screw to secure the lid. Tighten it with adequate force to prevent them from
turning.
-
Secure the EPP cover of the unit through the control cover plate with a
Ø 3
.5x20 self-tapping screw.
-
For the further procedure, refer to chapter 6.2. Filter Inserting
-
To revive the unit after servicing, follow the steps in chapter 5.
Fig. 64
2) SECURE THE CABLE WITH A TIE STRAP
3) TIGHTEN THE 5x SCREW M6x25
5) INSERT THE FILTERS AND FILTER
6) PUT ON THE PLASTIC LID AND SECURE IT
4) SECURE THE CONTROLLER PLATE WITH A SELF-TAPPING SCREW
Fig. 60
Fig. 61
Fig. 62
Fig. 63
Содержание XHOUSE-300
Страница 8: ...8 Version 1 GBR 25 10 2022 D 502 0287 5x 6 7 5 8 9 Fig 2 5 8 19 Fig 3...
Страница 9: ...9 Version 1 GBR 25 10 2022 D 502 0287 10 11 12 14 13 20 21 15 Fig 4 Fig 5...
Страница 31: ...31 Version 1 GBR 25 10 2022 D 502 0287 4 3 Block diagram of the Xhouse unit wiring Fig 38...
Страница 34: ...34 Version 1 GBR 25 10 2022 D 502 0287 5 4 2 Description of the functions of the buttons and regulation Tab 14...
