MASTER/SLAVE MODE
(optional function)
2. Master / Slave mode:
For certain installations, multiple-control structure might be required. You can setup the keyboard to
Master / Slave mode in order to work with more than 1 keyboard simultanously. In this operation
mode, all keyboards have to be connected in a chain, with RS-485-1 for output and RS-485-2 as
input ports. The keyboard that is nearst to the devices has the highest priority.
How to setup Mater/Slave mode:
Keyboard 1
Keyboard 2
Other keyboard
or termination
To PTZ or speed
dome devices
Up to
32 devices
...
ON
1
2
3
4
5
6
7
8
2. Depends on the wiring, you might need to activate the on-board
termination of the keyboard for RS-485 connection chain. Use DIP-
switch no. 7 (port RS-485-1) and no. 8 (port RS-485-2) for enable or
disable the on-board termination.
1. On the back panel, set the DIP-Switch no. 3 to state „OFF and no. 4
to state „ON“
Setting
Steps:
ON
3 4
ON
7 8
6
