INSTALLATION
Unpacking
Please unpack the equipment and make sure all listed items and accessories are included in the box:
Keyboard controller
1
RJ-11 RS485 connection cable
1
Instruction manual
1
There are 2 RJ-11 connectors on the keyboard for RS-485 control:
RS485-1( Master port) line connector is normally used for Speed-Dome or other PTZ-device with RS-
For further information regarding wiring, please refer to the operation manual of the connected PTZ
devices.
Keyboard ID
Some PTZ devices might require the setup of keyboard’s ID ( sender ID), you can set the ID by
Connection
ID is 0
( default setting)
ON 1 2 3 4 5 6 7 8
ON 1 2 3 4 5 6 7 8
ON 1 2 3 4 5 6 7 8
ON 1 2 3 4 5 6 7 8
ID is 1
ID is 2
ID is 3
9 ~12V Power supply
500mA
Master port
Slave port
R
RS485+
Bl
RS485-
C
GND
Y
GND
RJ11 cable
Speed dome /
PTZ devices
4
Chunk box
1
Chunk box
485 connector. Indicator for chunk box wiring: Red:RS485+, Black: RS485 -, Gre en & Yellow: Ground.
changing the DIP-switch of no.1 and 2 on the back pane l of the keyboard. The default setting is “0”
