Xtreme Manufacturing XR5919-A Скачать руководство пользователя страница 26

Страница: 26 / 78

Chapter 4 – Controls

20 XR5919-A

tags, and have a qualified mechanic service or repair the

forklift BEFORE placing it into service again.

N. Digital Clock / Message Display

Displays warnings or status / information messages. If

there is no message or warning, it displays the digital

clock.

O. Transmission Shit Indicator

The transmission has two forward “F” and two reverse

“R” gears. It can operate in Automatic mode or Low

Range mode. When the transmission is in Neutral, the

Transmission Shift Indicator displays “N”.

The subscript “A” or “L” indicates the Auto or Low trans-

mission range. The reach forklift starts up with the trans-

mission in AUTOMATIC mode. By pressing the Auto/Low

switch on the dash, the machine switches from Automatic

to Low Range, indicated by the “L” in the subscript.

Pressing the Auto/Low button again switches back to

Automatic range, indicated by subscript “A”.

The “Low” mode is used for climbing steep grades, or

when ever slow speed is desired. The “Auto” mode adapts

to drive conditions and allows for higher speed travel.

P. Analog Tachometer Display

Indicates engine RPM on an analog/digital gauge.

Q. Digital Tachometer

The engine RPM is also displayed as a digital readout.

R. Hour Meter

Indicates and records engine operating hours. Use the

hour meter to establish a forklift maintenance schedule.

S. Menu Button Indicator

Use the soft button to the left of this indicator to access

the Main Menu screen.

Display Features

The display allows the operator to view vital engine

information and other critical functions, including gauge

display, engine diagnostics to monitor engine condition

and performance, fault codes, and warning lights.

Power Up

When the ignition is turned on, the display powers up and

defaults to GAUGE DISPLAY mode. The display should

remain in this mode for normal operation.

Figure 4.15 – Power Up Screen

Main Menu

Pressing the MENU button will bring up the MAIN MENU.

Pressing the MENU button again brings up the SERVICE

REMINDER screen.

Figure 4.16 – Main Menu

Utilities

The Utilities Menu is accessed from the Main Menu by

pressing the top left selection button.

Figure 4.17 – Default Utilities Menu

Menu Button

Enter Button

Select Buttons

Содержание XR5919-A















































































Результаты поиска

Содержание XR5919-A

Отзывы:

Похожие инструкции для XR5919-A

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR5919-A, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR5919-A

Отзывы:

Похожие инструкции для XR5919-A

Бренды по названию

Популярные бренды