Xtreme Manufacturing XR5919-A Скачать руководство пользователя страница 29

Страница: 29 / 78

Chapter 4 – Controls

XR5919-A 23

This area is for editing or resetting the service reminders

once a service has been completed and is different than

the SERVICE REMINDERS in the MAIN MENU where

users can check on the status of the service reminders

to see how many hours until the next service is required.

Scroll up or down through this screen using « or » buttons.

The button returns to the previous menu.

Press the “Edit” button to access the Service Remain-

ders editing screen. Use the reset button to get back to

factory settings.

Figure 4.28 – Edit Service Reminders

PG Control

This sub-menu is used by developers or trained personnel

only and is beyond the scope of this Operator Manual.

Figure 4.29 – PG Control Screen

Back-Up Camera Setup

This sub-menu is used by developers or trained personnel

only to setup an optional back-up camera.

Clear Faults

As the title implies, this sub-menu is used to clear any

engine or system faults and it is used by developers or

trained personnel only.

The LMI Display

The main features of the menu-driven LMI display are:

1 Function Keys F1 -F4 – displayed on TFT

2 Digital TFT Color Display

3 Function Keys F5 -F8 – displayed on TFT

4 LED Status Indicators

5 Rotary Control Knob – with push button function

6 Home Key – for return to main menu

7 USB Port – for service use

8 Set Key – confirm and accept the chosen settings

9 Escape Key – abort and return to previous screen

Figure 4.30 – LMI Display

Start Up

The LMI system display does not have a power button.

It powers up whenever the ignition key is turned ON and

it needs to be fully booted before operating the forklift.

When the system boots up, one of two screens will ap-

pear. If the unit has been off for more than 3 hours, the

Standard configuration screen will be displayed.

Figure 4.31 – Configure Operation Mode

If the system was on within the last 3 hours, the CONFIRM

OP-MODE screen will appear.

Содержание XR5919-A















































































Результаты поиска

Содержание XR5919-A

Отзывы:

Похожие инструкции для XR5919-A

Бренды по названию

Популярные бренды

Xtreme Manufacturing XR5919-A, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание XR5919-A

Отзывы:

Похожие инструкции для XR5919-A

Бренды по названию

Популярные бренды