Xtralis ADPRO FastTx, Инструкция по установке и эксплуатации

Страница: 87 / 138

ADPRO FastTx by Xtralis Installation and User Manual
Doc 11949_06
75
Figure 74: Alarm Preset Warning
Preset Positioning Time
Options: 0, 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 5, 10 seconds
Default: 1 second
The Preset Positioning Time is the delay (in seconds) between an alarm input trigger and the first
alarm image being captured to send to ADPRO VideoCentral. This delay will allow a PTZ camera
enough time to move to its alarm preset and come to a stop before acquiring the first alarm
image, eliminating blurred or unuseable images.
Auto Home
Options: Always, Never
Default: Never
ADPRO FastTx can be configured to automatically send a PTZ camera station to pre-position 1
after a period of no PTZ commands being issued to that camera station, or configured to leave
the PTZ camera station in its current position. When the
Always option is selected, a time value
is also necessary as explained below.
Auto Home Expiry Time
Options: 10 - 600 seconds
Default: 60 seconds
The Auto Home Expiry Time is the time (in seconds) that the ADPRO FastTx will wait, after the
last PTZ command, before sending the PTZ camera station to pre-position 1.
Note: Any queued preset request occurring during the period the ADPRO FastTx is in
setup mode will be cancelled. An alert will still be sent to ADPRO VideoCentral, but
image information will not be available.
Note: During the Preset on Alarm function, images could appear dark and/or blurry,
possibly causing ADPRO FastTx to interpret this as low contrast, and generating a
low contrast alarm.