XTline XT2024, Оригинальное руководство пользователя

Страница: 77 / 82

ATTENTION!

The value of vibrations may vary depending on the following factors:
-
The device is not used in accordance with all the instructions provided in this manual.
- The device is used for purposes other than the intended purpose.
- The selected accessories are not compatible with the device.
- The device is not place on a suitable surface during operation.
- The handle, covers and other components are not properly attached to the device.
If you experience discomfort or health problems while using the device, discontinue the work
immediately. Take reasonable breaks. Failure to take reasonable breaks may result in adverse
medical complications. You should consider the factor of usage depending on the nature of work
or application to choose appropriate break intervals. Minimise the amount of time you are
exposed to vibration of the equipment. Maintain the equipment as specified in this manual. Avoid
using the compressor at temperatures below 3°C. A certain level of noise is unavoidable when
using this device. Schedule noisy work for times that are generally approved and designated for
such work.
If required, observe the appropriate working hours and never use the equipment at times when
the nature of the application makes using the device unadvisable or prohibited. Appropriate
hearing protection should be worn by both the operator of the device and any other persons in
the vicinity.
GENERAL INSTRUCTIONS FOR OPERATING THE COMPRESSOR AND AIR TOOLS

Never inhale air directly from the compressor hose. Never aim the air flow directly at the
eyes. The air from the compressor may contain water or other unwanted particles and
impurities that may cause serious injury on entering the eyes.

Always put the device away in a manner that prevents contact with the switch. This could
lead to accidental activation of the device and a risk of consequent injury.

Use only the accessories recommended by the manufacturer. The use of any other
accessories may result in injury or void the warranty.

Work only with filtered and regulated compressed air. Dust, corrosive fumes or moisture
may damage the motor of the air tool.

The air hose must be made so as to withstand at least 150% of the maximum pressure
generated by the system.

Air tools and hoses must be couplings which, when disconnected, release the pressure
completely.

Never modify the device without prior approval from the manufacturer.

Only use the device with the specified maximum pressure (8 bar).

In the case of an unexpected failure of the compressor, stop and check the device.

If possible, use a condensate trap and regularly drain the condensate from the hoses and
pipes before and during use.

An undersized compressed air assembly may reduce the efficiency of the device.

Ensure that the compressor intake ports are not blocked and that nothing obstructs the
free flow of air.

The mains socket must always be within convenient reach from the device.