FS5.3e Elliptical
11
Operation of Your Console
FS5.3e
Console
Power Up
The FS5.3e elliptical is supplied with an external power supply. When power is connected to
the elliptical, the console will automatically power up. If there is no input to the console for 30
minutes, the console will go to stand-by mode to save energy. To turn the console on press
any key.
When initially powered on the console will perform an internal self-test. During this time
all the lights will turn on. When the lights go off the dot matrix display will show a software
version (i.e.: VER 1.0) and the time and distance windows will display an odometer reading.
The odometer reading displays how many hours the elliptical has been used and how many
virtual miles the elliptical has gone.
The odometer will remain displayed for only a few seconds then the console will go to the
start up display. The dot matrix display will be scrolling through the different workout profiles
of the programs and operating instructions. You may now begin to use the console.
